Metal Forming

Electrostatic powder coating

Electrostatic powder coating for metal parts; surface, colour and exposure define the finish.

Product SKU
EGY-ESC-001
Availability
In stock

Need help choosing? Share your requirements with our team.

ABOUT THIS PRODUCT

Details & specifications

Electrostatic powder coating sprays electrically charged coloured powder onto metal, then cures it in an oven, forming a tough layer that resists scratches and rust better than conventional paint.

What is it and how does it work?

Powder is applied to a prepared metal surface and heat-cured to the selected coating system. Film appearance and durability depend on preparation, substrate, powder and exposure, not colour alone.

Which options can be discussed?

  • Colour, gloss and texture within available powder systems.
  • Surface preparation determined after examining the parts.
  • Masking sensitive or fitting areas when shown in the drawing.

Where can it be used?

It can finish metal parts, door components or structures according to exposure. Corrosion or service-life requirements need suitable specifications and testing, not inference from the coating name.

How do you choose a suitable solution?

  1. Share material, part dimensions, quantity and photographs.
  2. State colour, texture and indoor or outdoor use.
  3. Identify no-coat areas and any required performance specification.

What affects the price?

Surface condition, preparation, area, volume, powder system and masking affect cost.

Questions before ordering

Does it work on every metal?

The substrate, preparation and heat-cure compatibility must be reviewed.

Does it guarantee a corrosion rating?

No rating follows without a specified system, preparation and use conditions.

Request a site or technical review

Share dimensions, photographs and intended use through the contact page, or use the WhatsApp site-review button above. For an existing product that needs attention, submit an after-sales request. The team confirms availability, specifications and scope in the technical offer.

Advantages

  • High resistance to rust, weather and scratches.
  • Even thickness with smooth, matt or gloss finish.
  • Wide colour range from the RAL chart.
  • Almost solvent-free with less material waste.

Process stages

  1. Surface preparation: removing rust, oil and old paint.
  2. Chemical treatment or blasting as required.
  3. Spraying powder with an electrostatic gun.
  4. Curing in the oven at the right temperature.
  5. Final check of colour and thickness.

What we need for a quote

Metal type, part dimensions and largest size, quantity, colour and current surface condition.

Quality and inspection in powder coating

We review the drawing with the client before starting to confirm dimensions, tolerances and material, and inspect the first piece before running the full quantity on repeat orders. After machining we measure critical dimensions and deliver clean parts protected from rust, with optional welding, assembly or coating so you receive a part ready to install.

Why choose EGY Trading for electrostatic powder coating?

EGY Trading has worked with factories, warehouses and companies across Egypt for years, delivering projects for clients such as PepsiCo, Friday and Snack Land. Every project starts with a free site survey, followed by a clear technical offer covering specifications, scope of supply and installation, and warranty, and we stick to the agreed schedule. After handover, our after-sales team handles periodic maintenance and breakdowns, with spare parts available locally.

How to order electrostatic powder coating

  1. Send the measurements, photos and type of use through the contact page or WhatsApp.
  2. We review the details and book a free site survey if needed.
  3. You receive the price quote and specifications within 24 hours of complete information.
  4. After approval we supply, install, test and hand over.

Warranty and after-sales service

Every electrostatic powder coating project comes with a warranty defined in the technical offer, plus training for your on-site team on correct operation and safety features. A periodic maintenance contract can cover scheduled inspection, cleaning, adjustment and replacement of worn parts before they cause a breakdown. If a problem occurs, submit a maintenance request with photos or a short video so the team can identify the cause and spare parts before the visit.

Tips before ordering

  • Prepare accurate measurements and clear photos of the site from several angles.
  • Define the type of use, daily operating cycles and who will use the system.
  • Ask about warranty and exactly what the offer includes, and compare offers on the same specifications, not price alone.
  • Make sure maintenance and spare parts are available locally after handover.

Do you offer a free site survey?

Yes. We offer a free site survey in Greater Cairo and industrial cities such as 10th of Ramadan, 6th of October and Ain Sokhna, and send the quote within 24 hours of complete information.

EXPLORE MORE

Related solutions

All products

LET’S TALK ABOUT YOUR REQUIREMENTS

The next step starts with a conversation.

Talk to our team